Product Description

ArmorWall Structural Insulated Sheathing™ Symmetrical Panel (SP) Vapor Permeable (VP) was launched to enable architects to pursue previously unattainable design features through its industry-leading structural strength, durability, continuous insulation properties, and fire, air and water-resistant capabilities.  

ArmorWall SP-VP arrives to the job site with a factory-applied vapor permeable coating that makes it an excellent choice for most multifamily and commercial buildings.  Based on the project needs and architectural specifications, ArmorWall SP-VP can be delivered in various sizes and with various insulation thickness and R-value. 

Like our other products in the series, ArmorWall SP-VP drastically reduces the number of installation revolutions around a building.  This helps to reduce costs and time to weather-in by weeks.

ArmorWall SP-VP’s innovative properties allow projects to meet and exceed continuous insulation, building code and green certification programs faster and more cost effectively.  ArmorWall SP-VP is manufactured in a near zero waste manufacturing plant in North Carolina.

Key Features of ArmorWall SP-VP Include

  •  Has the ability to provide a two-hour fire rated exterior wall assembly in one step.
  • ArmorWall SP-VP is the preferred solution for buildings in densely populated areas as well as high rise buildings where installers are able to work with single panels in place of several components
  • It is unique due to its additional layer of sheathing, made of Magnesium Oxide (MgO), a natural mineral with fire-resistant properties, on the interior face encompassing the rigid foam insulation.
  • The MgO layers replace the common sheathings (such as gypsum, plywood, etc.) and compounds found in other products that require additional coatings, time and cost.

ArmorWall SP-VP is the Best Solution for These Building Types

  • Buildings or specific wall areas that require a fire-rated wall assembly
  • Projects with thinner walls that require fire ratings
  • Projects with plenum spaces
  • Core and shell buildings
  • High rise buildings
  • High velocity wind zones
  • Job sites with minimum lay down space or short timelines
ArmorWall SP-VP Product Downloads

FileAction
ArmorWall SP VP Guide Spec v1.docxDownload 
MaxLife_ArmorSeal-VP_SafetyDataSheet.pdfDownload 
MaxLife_ArmorWall-SPVP_DataSheet.pdfDownload 
MaxLife_ArmorSeal-VP_DataSheet.pdfDownload 

For further documentation and details please visit the Downloads Page.

Project Highlights Featuring ArmorWall SP-VP

This medical office building in Opelika, AL will be ore durable and energy efficient thanks to the ArmorWall SP-VP installation.

Know the Advantages of ArmorWall

NFPA 285 Approved
Fully passed the NFPA 285 on its own without a required cladding on the front. This allows most UL tested, listed, and approved exterior finishes to qualify as part of the complete wall assembly.
Fusion Technology
Panel is manufactured using patented fusion technology bestowing unique properties to ArmorWall NC. Lamination not being party to the process allows a smooth foam backing.
Structural Sheathing
Thanks to the fusion technology and the elements of which ArmorWall is comprised, the structural strength of the panel allows direct attachment for cladding to the panel without the requirement of pin-pointing the studs.
Thermal Control Layer
The insulating layer of high density foam insulation is fused to the structural sheathing element which provides ease of use when conforming to the continuous insulation requirements in evolving building codes. The thermal layer is offered in a few standard thicknesses to meet the project required R-Values.
Panelized Construction
ArmorWall is ideal for handling the stress of factory-built wall assembly manufacturing process, including movement within the facility, deflection during transportation, and racking during wall erection. Self-adhered membranes have tremendous adhesion to the ArmorWall surface.
Mold and Mildew Resistant
No paper facings exist within the assembly to promote any biological growth.
Previous
Next
NFPA 285 Approved
Fully passed the NFPA 285 on its own without a required cladding on the front. This allows most UL tested, listed, and approved exterior finishes to qualify as part of the complete wall assembly.
Fusion Technology
Panel is manufactured using patented fusion technology bestowing unique properties to ArmorWall NC. Lamination not being party to the process allows a smooth foam backing.
Structural Sheathing
Thanks to the fusion technology and the elements of which ArmorWall is comprised, the structural strength of the panel allows direct attachment for cladding to the panel without the requirement of pin-pointing the studs.
Thermal Control Layer
The insulating layer of high density foam insulation is fused to the structural sheathing element which provides ease of use when conforming to the continuous insulation requirements in evolving building codes. The thermal layer is offered in a few standard thicknesses to meet the project required R-Values.
Panelized Construction
ArmorWall is ideal for handling the stress of factory-built wall assembly manufacturing process, including movement within the facility, deflection during transportation, and racking during wall erection. Self-adhered membranes have tremendous adhesion to the ArmorWall surface.
Mold and Mildew Resistant
No paper facings exist within the assembly to promote any biological growth.
Previous
Next

Other Panels in the ArmorWall Series